| |
1979-2004 Mustang and Fox Body Parts
Rear Suspension Components
 |
MUS-201 |
1979 - 2004 Double Adjustable Rear Upper Control Arms |
$200 |
| Adjust Pinion Angle Without Removing Control Arms! |
|
100% TIG Welded
|
|
1/4" Thick Formed Steel Clevis
|
|
Double Gussetted for Strength
|
|
Premium Rod Ends - Oversized with Teflon Liner
|
|
Right Hand / Left Hand Double Adjustable Threads
|
| 4130 Chrome-Moly Double Adjusters |
 |
MUS-207S |
Spherical Housing Bearings |
$105 |
| Spherical Rear Upper Control Arm Bearing |
Replaces sloppy stock rubber bushing
|
Provides solid pinion movement with no bind
|
Not recommended for normal street driving
|
| Fit 8.8 and 9" Housings |
 |
MUS-200 |
Single Adjustable w/ Delrin Bushings |
$200 |
MUS-200D |
Double Adjustable w/ Delrin Bushiings |
$250 |
MUS-200R |
Double Adjustable w/ Dual Rod-Ends |
$275 |
| Single or Double Adjustable Available |
| 100% TIG Welded |
| 1 5/8" Chrome-Moly Tubing |
| Premium Rod-Ends with Teflon Liners / Delrin Bushings with Steel Sleeves |
| |
| Single Adjustable Lowers Available with or without Spring Perches or Sway Bar Tabs |
| Double Adjustable Lowers Available with or without Spring Perches, Sway Bar Tabs NOT Available |
| Double Rod-Ended Lowers NOT Available with Spring Perches OR Sway Bar Tabs |
 |
MUS-203 |
Rear Anti-Roll Bar |
$300 |
| TIG Welded Chrome-Moly Construction. |
Does not Permit ANY Body Roll!
|
Allows you to Launch Straight, with More Efficient Weight Transfer.
|
Welds Between STOCK Frame Rails
|
| Chrome-Moly Teflon Lined Rod-Ends Used in ALL ARB Kits! |
Shocks and Struts
 |
S6001EM |
87-93 Strange Single Adjustable Front Strut |
$120/ea. |
S6001LM |
94-04 Strange Single Adjustable Front Strut |
$120/ea. |
| Strange Single Adjustable Front Struts |
| Simple Bolt-In Installation |
Easy Access to Adjustment Knob at Base of Strut
|
Can be Used with Coil-Over Kit Below
|
Note: 94-04 Cars which are lowered 2 inches or more may use S6001EM Strut
|
 |
S6001-2 |
Coil-Over Kit
|
$140
|
| Strange Front Coil-Over Conversion Kit |
|
Slides Over Strut to Allow the Use of Coil-Over Springs (Below)
|
|
Does NOT Include Struts or Springs
|
 |
|
|
|
SP14125 |
Hypercoil 14" 125# Springs |
$120 / Pair |
| |
Many Other Rates and Lengths Available |
|
| Hypercoil Coil-Over Springs |
| Available in 12" and 14" Lengths |
| Typical Mustang Front Drag Rates are from 110# - 175# |
| Other Springs Available for Rear Coil-Over Shocks |
 |
|
|
|
S6000EM |
79-93 Strange Rear Single Adjustable Shock |
$70 / ea. |
S6000LM |
94-04 Strange Rear Single Adjustable Shock |
$70 / ea. |
| |
|
|
| Strange Engineering Bolt-In Rear Shocks |
|
Simple Bolt-In installation
|
|
Easily Accessible External Adjustment Knobs
|
|
Ideal for Street and Track
|
Note: 94-04 Cars which are lowered 2 inches or more may use S6000EM Shocks |
Brakes - Front and Rear
 |
B4143WC |
82-86 Strange Pro Race Steel Front Brakes for Stock Spindles |
$675 |
| B4145WC |
87-93 Strange Pro Race Steel Front Brakes for Stock Spindles (V8 Only) |
$675 |
B4446WC |
94-04 Strange Pro Race Steel Front Brakes for Stock Spindles |
$549 |
| |
Note: |
|
B4446WC Uses Existing Hubs and 2 Piston Calipers |
| 4 Piston Drag Race Front Steel Brake Kits |
|
Aluminum Calipers and Hubs
|
|
1 Piece Forged Steel Slotted Rotors
|
|
Entire Kit Weight is 34#
|
Note: 94-04 Brake Kits Use Existing Spindles and 2 Piston Calipers |
 |
B1714WC |
Strange Rear Brakes for 8.8 Housing Ends / Requires use of Strange Axles and C-CLip Eliminator Kit
|
$575 |
B1718WC |
Strange Rear Brakes for Strange H1138 9" Housing Ends |
$575 |
B1706WC |
Strange Rear Brakes for Late Big Ford (Torino) Housing Ends |
$575 |
B1710WC |
Strange Rear Brakes for Symmetrical Housing Ends |
$575 |
| 4 Piston Drag Race Front Steel Brake Kits |
|
Aluminum Calipers
|
|
1 Piece Forged Steel Slotted Rotors
|
|
Entire Kit Weight is 24# (Single Caliper Kits)
|
|
Other Kits Available for Early and Late Big Ford Housings Ends as well as Dual Caliper Kits
|
 |
MUS-MCA |
79-04 Mustang Master Cylinder Adapter Plate |
$80 |
| Billet Aluminum Master Cylinder Adapter Plate |
| Allows the use of a Chrysler Style Master Cylinder |
| Includes Hardware |
Note: 94-04 Cars Require Slight Modification to Brake Pedal Assembly |
 |
B3359TA |
1.125" Bore Aluminum Master Cylinder |
$80 |
B3360TA |
1.032" Bore Aluminum Master Cylinder |
$80 |
 |
B3369 |
Adjustable Proportioning Valve |
$48 |
| Strange Master Cylinders |
| 1.125" Bore Master Cylinder for use with 4 Piston Brakes on all 4 Wheels |
| 1.032" Bore Master Cylinder for use with 1 or 2 Piston Front Brakes and 4 Piston Rear Brakes |
Includes Threaded Pushrod and 1/2-20 Hardline Adapter Fittings
|
| |
| Adjustable Proportioning Valve - Allows less braking pressure to be applied to either the front or rear brakes |
Includes 1/8 NPT - 3/16 Hardline Adapter Fittings
|
|
|
All Classes in 2008! |
