TRZ Tubular Control Arms - C2 and C3 Corvette

Manufacturer of High Performance Suspension Components

All of Our Products are Manufactured In-House with TIG Welded 4130 Chrome-Moly Tubing

Choose a Vehicle From the Menu on the Left to See What we Have Available.

1963-1982 Corvette Parts

Front Suspension Components

Chrome-Moly, 100% TIG Welded Design with Billet Aluminum Cross Shafts.
Built-in 6 Degrees of Positive Caster.
Designed to Replace Stock Control Arms with No Modifications.
Reduces Weight by up to 10lbs Per Side.
2 different lowers available to fit your spring type:
	One is Available to Use Your Stock Spring and Shock or the QA1 PRO-Coil System
	The Second Will Accept All Other Coil Over Shocks (Strange, Santuff, etc.)
Uppers Come with Limiters in Place to Control Front Suspension Travel.
Designed for Drag Race Applications Where Spindle Caster Can Range from 0 to 10 Degrees.
Optional PRO Version uses Heavy Duty Chrome-Moly Rod Ends in place of Delrin Bushings on the Upper Control Arms. ($150 extra)
Note: PRO Version May Require Modification of Inner Fender

Spindle Conversion Also Available! We can Make these A-Arms Accept Early Camaro Style Spindles
Early Camaro Spindles or our Drop Spindles # 325-1 (Below) Combined with our Billet Aluminum Steering Arms Can Reduce weight by an Additional 13 pounds

Includes: 2 Upper Control Arms, 2 Lower Control Arms, Assembled with Balljoints and Control Arm Bushings, and 2 Limiter Bolts.

	325-1	1.5" Drop Spindle for use with Stock Early Camaro Type Brakes	$595
	325-2	1.5" Drop Spindle for use with Spindle Mount Brakes	$595

Easily Drop Your Front End "1.5 Inches" with these Fabricated Drop Spindles.
Designed for Drag Race Applications.
Does not Affect Front Suspension Geometry.
Fits Aftermarket Disc Brake Setups.
TIG Welded Chrome-Moly Construction.
Supplied without Powdercoating
Must Be Used in Conjunction with Our Billet Steering Arms (Below)

Steering Components

	320-3	Front Steer Manual Rack and Pinion Conversion Kit	$850

Convert your steering to a Front Steer Manual Rack and Pinion.
Kit Includes:		Custom Narrowed Pinto Style Rack
		Billet Aluminum Steering Arms
		Bump Steer Kit
		Rack Clamp and Rack Mount Plate
		Steering Shaft and Shaft Brace
		and 3 Chrome-Moly U-Joints

Notes:		Must Switch to Early Camaro Spindles for this Conversion
		Any Component may be Omitted or Sold Seperately
		Welding Required
		Rack Clamp and Shaft Brace are TIG welded Chrome-Moly
Click Here to Download the Installation Instructions for 320-3 Rack Kit

	303	Billet Aluminum Steering Arms	$190

For Early Camaro Spindle Conversion
Combine these Steering Arms with an Early Camaro Spindle or our Drop Spindle and Remove up to 13 Additional pounds!
Allows Excellent Bump Steer Adjustability.
BEWARE of IMITATIONS! Look for the Machined TRZ Logo on Each Arm!

	320-202-1	Bump Steer Kit for use with Pinto Rack	$160
	320-202-2	Bump Steer Kit for use with Stock Steering	$160

Fixes "Bump Steer"
A must for lowered cars
Replaces your tie rod ends to maintain the correct steering geometry.
Includes Chrome-Moly Rod Ends

Front Shocks

GMP4350-1	QA1 Pro-Coil Single Adjustable for Small Block Vehicles	$475
GMP4450-1	QA1 Pro-Coil Single Adjustable for Big Block Vehicles	$475
DGMP4350-1	QA1 Pro-Coil Double Adjustable for Small Block Vehicles	$700
DGMP4450-1	QA1 Pro-Coil Double Adjustable for Big Block Vehicles	$700
RGMP4350-1	QA1 Pro-Coil 'R Series' Single Adjustable for Small Block	$500
RGMP4450-1	QA1 Pro-Coil 'R Series' Single Adjustable for Big Block	$500

QA1 Bolt-In Front Coil-Over Systems
Easy Bolt-In Installation
Adjustable Ride Height
Mounting Hardware Included

Compatible with stock control arms or our 320-STK and 320-PRO-STK Front Control Arm Sets
Note:	These Shocks May Also be Used with our 320-CO and 320-PRO-CO A-Arms As Well
	We recommend using our 'CO' series lower control arms with these shocks and a supplied set of bearings. Part # EMB8-102PK

Front Brakes

B4166WC	63-64 Strange Pro Race Steel Front Brakes	$675
B4168WC	65-68 Strange Pro Race Steel Front Brakes	$675
B4170WC	69-82 Strange Pro Race Steel front Brakes	$675
B4110WC	Strange Pro Race Steel Front Brakes	$675
B4110WC	Fits Our 1.5" Drop Spindles #325-1	$675
B4597WC	Strange Pro Race Lightweight Steel Front Brakes	$540
For Spindle Mount Wheel Applications	Fits our 1.5" Drop Spindles #325-2	$540

4 Piston Drag Race Front Steel Brake Kits
Aluminum Calipers and Hubs
1 Piece Forged Steel Slotted Rotors
Entire Kit Weight is 34#
Note: Spindle Mount Front Brake Kit Comes with SINGLE PISTON CALIPERS

	B3359TA	1.125" Bore Aluminum Master Cylinder	$80
	B3360TA	1.032" Bore Aluminum Master Cylinder	$80

	B3369	Adjustable Proportioning Valve	$48

Strange Master Cylinders
1.125" Bore Master Cylinder for use with 4 Piston Brakes on all 4 Wheels
1.032" Bore Master Cylinder for use with 1 or 2 Piston Front Brakes and 4 Piston Rear Brakes
Includes Threaded Pushrod and 1/2-20 Hardline Adapter Fittings

Adjustable Proportioning Valve - Allows less braking pressure to be applied to either the front or rear brakes
Includes 1/8 NPT - 3/16 Hardline Adapter Fittings

All Classes in 2008!

(407)933-7385
FAX: (407)933-7589

Kissimmee, FL 34744